Black Shower System, Mixer & Massage Jets

Unlike a standard column made of a tube and an arm, this model is a flat black panel, edged with a thin chrome trim along its full height. At the top, the rain head forms a tray that extends above your head.

On the face, from top to bottom: a small rectangular window, a first square nozzle, the controls, then a second nozzle. On the right edge, a chrome square hand shower hangs on its holder, with a corrugated hose. The body is stated to be stainless steel. Black dominates; chrome only serves to highlight the outlines.

The two square nozzles are mounted diamond-wise. One photo shows a finger tilting one of them in its frame: you can therefore aim the spray at your back or hips depending on your height.

The visible controls are a round button, placed above, and a lever handle below. The button selects the water outlet, the lever opens the water and sets hot and cold.

The control is a standard mixer lever handle: you set the temperature by hand, in a single movement.

The panel is fixed surface-mounted against the shower wall and connects to the hot and cold supplies. You need to drill for its fixings: on tiles, use a suitable drill bit, or leave the installation to a plumber if your supplies are not in the right place.

Also check the ceiling height, as the rain head is at the very top of the panel.

The black face is cleaned with a soft cloth and soapy water. After showering, a squeegee prevents dried drop marks, which are more visible on black than on chrome.