Wall-mounted toilet bidet sprayer with mixer

Where other bidet-sprayer mixers require opening the partition, this one is surface-mounted. Two eccentric connectors screw onto the hot and cold supplies, two square rosettes cover them, and the rectangular body fixes onto them.

The eccentrics make up for a slight offset between the supplies; the photo gives 15 cm between the centres of the connectors. If your two water outlets already exist, for example those of an old hand basin, installation needs only a few tools.

Without these supplies, a plumber will need to create them before fitting.

The flat lever at the front of the body sets the temperature: a photo illustrates the range from hot to cold with a red and blue arc. In winter, intimate hygiene is done with warm water, not with the icy water of a handset connected to the cistern.

The square handset, about 11.5 cm high, sits in a holder at the end of the mixer. It receives water through a ribbed metal hose.

The mixer only works with both supplies, hot and cold. The flat lever is operated with one finger, with no need to grip it.

The supplier also presents it for other uses, shown in its photos: rinsing the toilet bowl, washing the floor, rinsing a mop, bathing a small pet or cleaning a washing machine. The powerful spray starts when you squeeze the trigger.

In the box, the photo of the contents shows the mixer body, the handset, the hose, two eccentric connectors, two square rosettes and seals.

Brushed stainless steel, black or gold: a soft cloth and soapy water look after them, never anything abrasive on gold. Gold warms up a toilet with beige tones, black gives a more graphic style.