Stainless steel 3-way toilet tap

This 3-way tap comes in versions to suit your supply. The photos show it in detail: at the top, a female nut in G3/8, G1/2, G3/4 or G7/8; at the bottom, a male outlet of the same size, which goes on to the cistern; on the side, a male 1/2″ outlet, identical on all versions.

The French standard for a toilet supply is most often 3/8″ (12x17): that is generally the size to choose.

If in doubt, unscrew the hose from your cistern and look at its thread, or measure it, before choosing.

The side outlet, 1/2″ (15x21), matches the usual thread of a handset hose: the sprayer screws straight onto it, without an adapter.

A photo shows it in place under a toilet pan, at the end of a braided hose: the tap fits in without changing anything else. Simply close the supply, unscrew, insert the tap and screw back.

The water feeding the sprayer is that of the toilet supply, in other words cold water. The body stays straight, in line with the supply, which makes it hard to see behind the pan. The sprayer outlet leaves from the side, opposite the handle.

A round knob on the front carries a stem handle pointing down: this controls the water. Close it after each use, so the sprayer is not left under pressure and does not drip.

The body is stated as stainless steel, chrome finish. Wipe it from time to time; for white deposits, a cloth soaked in white vinegar, then a rinse with clear water.

If your supply has an unusual size, our customer service, reachable Monday to Saturday from 10am to 6pm, will help you choose.