Luxury Gold Shower Head

This shower head uses the rod format: a cylinder 28 mm in diameter and 200 mm long, according to the manufacturer's diagram. No flaring head, no adjustment ring: one continuous line.

The brushed gold finish gives a deep, satin gold. In the wall photo, it matches a gold cylindrical holder and a hose of the same shade.

It is the choice for a bathroom that already has gold taps and fittings, or that wants a single touch of warm colour on a light wall.

The close-up shows the grey plate set into a rectangular cut-out in the tube, edge to edge. It carries several rows of regular nubs, staggered.

The soft-looking nubs are cleaned with a press of the finger under the spray. Their light grey stands out against the gold: you spot a nozzle that is clogging at once.

Under the gold, the supplier states a stainless steel tube. As the window is flush with the tube, nothing protrudes: the shower head slips into its holder without catching, and water does not collect on a rim. You hold it in the full hand, plate facing you, and aim the spray with your fingertips.

The grey threaded end, marked G1/2 in the photo, screws onto a 1/2″ (15x21) hose. Hand-tighten with the flat washer in place: no plumber needed.

The gold holder and hose in the lifestyle photo are not stated as part of the offer. If your hose is chrome, plan on a gold one for a matching set.

To preserve the finish, clean with soapy water and a soft cloth, then dry. Avoid acidic limescale removers and abrasive sponges. Before first use, let water run through the hose alone for a few seconds.