Weekend Flash Saleuntil Sun 8 Nov−15% site-wide with codeEnter the code at checkout.

Bath tap

Gold wall-mounted bath shower mixer with handset and hose


Nouveau304 stainless steel In stock — dispatched within 24 hours
Sale price€143,90 EUR

Single-lever wall mixer — flow and temperature in one movement, even with wet hands.

Bath spout — the bath fills while you get on with something else.

Handheld shower — the spray goes exactly where you need it.

Reinforced hose

Colour: Brushed stainless steel
Ce que ce produit contient
  • 1 tap
  • Multiple components
  • American Express
  • Diners Club
  • Discover
  • Google Pay
  • JCB
  • Mastercard
  • PayPal
  • Visa
30 days to change your mind Send it back, no questions asked.
  1. Commandée 7 novembre
  2. Expédiée 9 novembre
  3. Livrée 17–19 novembre

Before you order

The questions everyone asks

Will I be missing a part?

  • 1 tap
  • Multiple components

Will it last?

Body in 304 stainless steel. Available in 2 finishes: Brushed stainless steel, Black.

What if it doesn’t suit me?

30 days to change your mind, no reason needed. Got a question before ordering? We reply Monday to Saturday, 10am to 6pm.

Specifications

Gold wall-mounted bath shower mixer with handset and hose

The gold wall-mounted bath-shower mixer with handset and hose replaces the bath taps on their existing outlets. Its body is 304 stainless steel. Its cartridge is ceramic — the part that decides whether a tap drips after three years. This model is listed in the our shower mixers.

It is fitted on three holes. The package contains 1 tap, multiple components. Ships within 24 hours, with 30 days to change your mind.

See all our shower mixers
Material
304 stainless steel
Finishes
Brushed stainless steel, Black
Installation type
3 holes
In the box
  • 1 tap
  • Multiple components
Delivery
Free, dispatched within 24 hours
Returns
30 days to change your mind
Choosing well: Bath Tap

Choosing well: Bath Tap

A hose is chosen on its length and connectors. Threads are standardised — 15/21, i.e. half an inch — so almost every model fits almost every shower. The length depends on the height of the rail: 1.50 m for a standard shower, 1.75 m if the rail is high or the bath deep.

The other models are gathered in our Bath tap.

Bath tap: standard length and connectors

Bath tap: standard length and connectors

Between two hoses, the anti-twist protection and the sheath material decide it: a hose that twists kinks and ends up leaking at the connector.

  • 304 stainless steel body
  • Standard 15/21 thread, compatible with almost all showers
  • Anti-twist sheath, so it does not kink in use
  • Washers supplied, replacement by hand without tools
  • Length suited to common shower rails

As for the shower head, XXL Ceiling Shower Head screws onto the standard connector.

Replacing it without tools

Replacing it without tools

It is replaced by hand, without tools: unscrew, check that the washer is properly in place, screw back. It is the cheapest part to change and the first to leak.

On a shower installation, maintenance comes down to limescale. A descaled hose and clear nozzles restore the original pressure — this is almost always where the impression of a weakening shower comes from.

In the same spirit, Chrome shower system with shelf and square rain shower head completes the installation.

What makes the difference

Waiting twenty minutes for the bath to fill.

Our answer

A generous flow: filling is no longer the longest part of the bath.

Turning the water off to switch from spout to handset, then setting the temperature again.

Our answer

A diverter that switches without losing the mix you have already set.

A handset with a hose too short to rinse the bottom of the bowl.

Our answer

A hose that reaches both ends of the bath.

A rubber washer that flattens and leaves the tap dripping after two years.

Our answer

A ceramic cartridge: two polished discs that shut off the water by contact.

Receiving just the one part, and having to order the rest elsewhere.

Our answer
  • 1 tap
  • Multiple components

Frequently asked questions

About this tap

Another question?
Monday to Saturday, 10am to 6pm.

+33 7 56 88 18 90 Write to us
How do I look after it?
A soft cloth and soapy water. Avoid any acidic or chlorine-based product: that is what dulls a matt black coating.
How is it installed?
It is fitted on three holes, at the standard centre distance.
What is the body made of?
304 stainless steel — the grade that resists corrosion, the same as sinks themselves.
What's in the box?
The parcel contains: 1 tap; Multiple components.
Are taps easy to install yourself?

Most of our models are designed to be easy to fit yourself, with clear instructions and standard tools. For some of the more complex models, it may be advisable to call in a professional.

What should I do if my tap starts to leak?

If your tap starts to leak, first check whether the problem comes from the seals or the cartridge. These parts can wear over time and are easy to replace. If the problem persists, contact our customer service team for help or to claim under the guarantee, if applicable.