Designer Gold Shower Head

This shower head has no head: it is a straight rectangular block, with no curves, 35 mm wide by 205 mm long according to the dimensioned photo. The water outlets form a tight grid on the upper third of one face.

Its rigorous line suits a walk-in shower with concealed taps and fittings, or a set where everything is rectangular. In the lifestyle photo, it rests in an angled gold holder, with a gold hose hanging below. Its constant width, with no bulge, makes it easy to store in a narrow holder.

The outlet surface is narrow: the spray is tight, which is useful for rinsing precisely, aiming at a zone or cleaning a corner of the shower. The bar shape is held like a handle, with no head that tips.

The outlets protrude slightly from the face, as seen from the side. The supplier mentions an anti-limescale coating; above all, we note that running a hand over it with the water on keeps the grille clean.

For an enveloping rain, combine it with a fixed shower column head: the gold bar then serves as a rinse handset.

At the bottom, a G1/2 threaded end, marked by an arrow in the photo, screws onto a standard 15x21 hose. Washer in place, hand-tightened: no tools, no plumber.

Only the shower head is delivered. Brushed gold is cleaned with a soft cloth and soapy water; no scouring sponge, which would leave visible scratches on such a flat surface.

Free UK delivery. The body is stated as stainless steel. For the holder, prefer a square model or one with a wide opening, suited to the rectangular section.