Complete Bath Shower Mixer

Where other mixers play with angles, this one rounds everything off: a cylindrical body, a flat, slightly raised lever and a spout that tapers towards the front. It comes in matt black, which stands out against a white bath, and in glossy chrome, which is more classic.

The photos show it on a bath as well as on a basin. Its size stays compact: 165 mm tall with a 100 mm spout and a 45 mm base. It fits without crowding the edge, even a narrow one. Matt black also avoids reflections in a dark bathroom.

On top of the spout, a round, knurled dial acts as the diverter: the detail photo shows it being turned with a fingertip. Water then no longer leaves through the spout, which has an aerator, but through the G1/2″ outlet underneath, where a handset hose screws on.

The lever controls flow and temperature in one movement. The supplier calls it a thermostatic mixer, but nothing in the photos suggests it: there is no graduated temperature dial. Treat it as a standard mixer, set by hand. The red and blue mark under the lever shows which side the hot water comes from.

Despite the word “complete” in the title, the supplier states it is sold without a shower head or hose, and the handset visible in the lifestyle photo is not listed as an accessory. Write to us if you want confirmation before ordering, or plan on a 1/2″ hose and handset.

For installation, you need a 32 to 38 mm hole in the bath deck. The mixer is fixed from below and connected to the hot and cold water. As the waste is not part of the delivery, keep the one from your bath.