6-function shower system with 5 jets, temperature display and LED

The photos detail the six functions: the built-in rain shower head at the top, the handset on its holder, the 5 body jets, a massage mode, the spout at the bottom of the panel and the LED lighting of the shower head. It all sits on a single vertical plate, with no tube or arm.

The panel measures 1,345 mm high and 200 mm wide according to the manufacturer's sheet visible on the board, and weighs 7 kg.

It suits a walk-in shower or a bath against a wall, when you want complete equipment without multiplying taps.

The control is via three round buttons. The pictograms on the board show a diverter, which sends the water to the rain, the jets, the handset or the spout, and a hot and cold water control. A small screen beneath the rain shower head shows the water temperature.

The 5 body jets are round nozzles spread from shoulder height to leg height; in the visuals, they project the water sideways, towards the back.

The rectangular handset unhooks from its holder at the top right of the panel, with a 1.5 m hose stated in the contents of the box.

The “Easy installation” board shows the fitting: you mark the holes, drill, insert the wall plugs, screw on the wall bracket, then connect the supply hoses before hanging the panel and locking it with a screw.

The hot and cold water supplies must come out of the wall behind the panel. If they're already there, a well-equipped DIYer can handle it; if they need moving or creating, call a plumber.

The finish shown is black brushed stainless steel. Wipe it after showering with a microfibre cloth to limit limescale marks, with no abrasive product.